The location of explosion proof camera is very important

For example, when we install an explosion proof camera, we'd better avoid some of the more complex light positions to meet the requirements. Otherwise, if we have a fixed focus camera always have to face some explosion-proof vehicle light illumination, then we are doomed to a wide dynamic effect of higher or blurred images make the necessary choices. It will eventually give us some avoidable extra expenses.

Of course, in addition to avoiding the effects of light, some of the advantages of some of the camera's camera instinct are also fully utilized in the choice of our installation.

For some uses the white light to complete the night monitoring white light explosion proof camera, if we put it in some dark but management area of relatively sensitive words, then in addition to its white light to achieve some limited lighting outside, more time will be more obvious because of its lighting device and play for a deterrence around, and this sometimes deterrent patrol more effectively than ordinary.

However, for some light adaptation ability is weak, or there is no infrared function of the device, we need to be in a more spacious environment, in addition to make up for deficiencies in the light treatment on the outside, also can be very good to avoid strong adverse effects on the incident light to bring equipment.

The installation posture of explosion proof camera determines the working effect

In addition to the installation of the position, the attitude selection of the explosion-proof camera also determines the working performance of the explosion-proof camera to a certain extent.

For example, if we choose to install an explosion proof camera at a horizontal angle, then it has the advantage of being able to see the details of some people or things. With the rising of the current PTZ activity, it can also more widely capture some other fixed-point explosion-proof camera difficult to explore the details, improve the monitor for the details of the grasp. However, this kind of installation method is a great sacrifice for the concealment of explosion proof cameras. In addition, it is more vulnerable to the influence of the surrounding light on the imaging quality of the explosion-proof camera. Therefore, for the installation of such a gesture, the light adaptability of the explosion-proof camera can not be ignored.

For many monitoring environments, the angle of view is the most commonly used working posture of explosion-proof cameras. Concealed, macroscopic observation is good, and it is not easy to be disturbed by light, which is the biggest feature of this installation method. However, its disadvantage lies in the sacrifice of details. And in order to achieve the best shooting effect, the installation height must also be strictly grasped. However, for some gas stations, or underground coal mines, such installation may be able to get a lot of unexpected results.

In addition to the two installation posture, looking up the installation is also a solution, but this way for the explosion-proof camera light adaptation has a very high demand, but also to protect have significant restrictions, so the installation mode is less and less, but we will elaborate more than.

In fact, in many cases, we grasp in some details can more or less affect the performance of equipment. And when we pay attention to these details and use them flexibly, some performance deficiencies may be compensated in a simpler and more economical way.